S.L. 427.78 чл. 4Energy label and information requirements.

(1) The technical documentation referred to in regulation

6(2)(a) of the Energy Labelling Regulations shall include:

(a) the name and address of the supplier;

*See regulation 1(5) of these Regulations as originally promulgated.

(b) a general description of the model, sufficient for it to be unequivocally and easily identified;

(c) information, including drawings as relevant, on the main design features of the model and in particular items which appreciably affect its energy consumption;

(d) reports of relevant measurement tests carried out under the test procedures of the harmonised standards referred to in sub-regulations (7) and (8);

(e) operating instructions, if any.

(2) The label referred to in regulation 5(1) of the Energy Labelling Regulations shall be as specified in Schedule I. The label shall be placed on the door of the appliance, in such a way as to be clearly visible and not obscured. For multicavity ovens, each cavity shall have its own label, except a cavity which does not fall within the scope of the harmonised standards referred to in sub-regulations (7) and (8).

(3) The content and format of the fiche referred to in regulation 5(2) of the Energy Labelling Regulations shall be as specified in Schedule II.

(4) Where the appliances are offered for sale, hire, or hire purchase by way of a printed or written communication or by other means whereby the potential customer cannot be expected to see the appliance displayed, such as a written offer, a mail order catalogue, advertisements on the Internet or other electronic media, that communication shall include all the information specified in Schedule III. This requirement shall also apply in respect of offers for built-in ovens for integrated kitchens.

(5) The energy efficiency class of each cavity of an oven shall be determined in accordance with Schedule IV.

(6) The appropriate terms to be used on the label and the fiche as referred to in regulation 5(1) of the Energy Labelling Regulations shall be selected from the table set out in Schedule V.

(7) The information required by these regulations shall be obtained by means of measurements made in accordance with harmonised standards adopted by the European Committee for Electrotechnical Standardization (Cenelec) under mandate from the Commission in accordance with Directive 98/34/EC, the reference numbers of which have been published in the Official Journal of the European Communities and for which Member States have published the reference numbers of the national standards transposing those harmonised standards.

(8) The provisions of Schedules I, II and III requiring the giving of information relating to noise shall apply only where that information is required by Member States under Article 3 of Directive 86/594/EEC. This information shall be measured in accordance with that Directive. SCHEDULE I Based on Annex I of Directive 2002/40/EC

LABEL