S.L. 427.19 Art. 57documentation appropriate, for this of these references of binding Scope This be used for the these regulations. Part A of lays down - - Part B of lays down - a - a - - - - - - - - a - When representative Part A and equipment. emission conditions of

Welding generator Any rotary device which produces a welding current.

Amended by: SCHEDULE II L.N. 257 of 2026.

Based on Annex II of the Direþctive

EC DECLARATION OF CONFORMITY The EC declaration of conformity must contain the following particulars: - name and address of the manufacturer or his authorised representative - name and address of the person who keeps the technical - description of the equipment - conformity assessment procedure followed, and, where name and address of the notified body involved - measured sound power level on an equipment representative type - guaranteed sound power level for this equipment - a reference to these regulations - the declaration that the equipment conforms to the requirements regulations - where appropriate, the declaration(s) of conformity and the other European Union Directives applied - the place and date of the declaration - particulars of the signatory authorised to sign the legally declaration for the manufacturer or his authorised representative. SCHEDULE III Based on Annex III of the Directive METHOD OF MEASUREMENT OF AIRBORNE NOISE EMITTED BY EQUIPMENT FOR USE OUTDOORS

Schedule lays down the methods of measurement of airborne noise that shall determination of the sound power levels of equipment covered by reguulations with a view to the conformity assessment procedures of these this Schedule for each type of equipment referred to in regulation 2.1

basic noise emission standards general supplements to these basic noise emission standards for measuring the sound pressure level on a measurement surface enveloping the source and for calculating the sound power level produced by the source. this Schcdulc for each type of equipment referred to in regulation 2.1

recommended basic noise emission standard including reference to the basic noise emission standard chosen from Part A the test area the value of the constant K 2A the shape of the measurement surface the number and position of microphones to be used operating conditions including the reference to a standard, if any requirements relating to mounting of the equipment method to calculate the resulting sound power levels in the event that several tests with different operating conditions are to be used further information. testing specific types of equipment, the manufacturer or his authorised may in general choose one of the basic noise emission standards of apply the operating conditions of Part B for this specific type of In the event of a dispute, however, the recommended basic noise standard laid down in Part B has to be used together with the opcrating Part B.