S.L. 427.1 Art. 3Applicability.

(1) These regulations shall apply to simple pressure vessels (‘vessels’) manufactured in series with the following characteristics:

(a) the vessels are welded, intended to be subjected to an internal gauge pressure greater than 0.5 bar and to contain air or nitrogen, and are not intended to be fired;

(b) the parts and assemblies contributing to the strength of the vessel under pressure are made either of non-alloy quality steel or of non-alloy aluminium or non-age hardening aluminium alloys;

(c) the vessel is made of either of the following elements:

(i) a cylindrical part of circular cross-section closed by outwardly dished and/or flat ends which revolve around the same axis as the cylindrical part;

(ii) two dished ends revolving around the same axis;

(d) the maximum working pressure of the vessel does not exceed 30 bar and the product of that pressure and the capacity of the vessel (PS × V) does not exceed 10 000 bar.L;

(e) the minimum working temperature is no lower than -50°C and the maximum working temperature is not higher than 300°C for steel and 100°C for aluminium or aluminium alloy vessels.

(2) These regulations shall not apply to:

* See regulation 2(1) of these Regulations as originally promulgated.

(a) vessels specifically designed for nuclear use, failure of which may cause an emission of radioactivity;

(b) vessels specifically intended for installation in or the propulsion of ships and aircraft;

(c) fire extinguishers.