S.L. 427.19 Art. 3for use by serving - and unloading persons during of the vertical spindle and or an from separate the end of the for loading or dismantling 30º to the structures. 4. A saw blade in more pulleys. 5. A sawblade maximum and a mounted on a during - - - 6. Chain A of an designed to be 7. A vehicle. Sec 8

Builders’ hoist for the transport of goods A power-operated, temporarily installed builders’ hoist intended persons who are permitted to enter engineering and construction sites,

(i) defined landing levels, having a platform: - designed for the transportation of goods only - which permits the access of persons during loading - which permits the access and travel by authorised erection, dismantling and maintenance - guided - travelling vertical or along a path within 15º max. - supported or sustained by: wire, rope, chain, screwed nut, rack and pinion, hydraulic jack (direct or indirect), expanding linkage mechanism - where masts may or may not require support structures; or

(ii) either one upper landing or a work area extending to guide (e.g. a roof), having a load-carrying device: - designed for the transportation of goods only - designed that there is no need to step on it unloading purposes or for maintenance, erection and - from which persons are prohibited at any time - guidec - which is dcsigned to travel at an angle of at least vertical but may be used at any angle - sustained by steel wire rope and a positive drive system - controlled by constant pressure type controls - which does not benefit from the use of any counterweight - having a maximum rated load of 300 kg - having a maximum speed of 1 m/s - and where the guides require support from separate Building site band saw machine hand-fed powered machine weighing less than 200 kg fitted with a single the form of a continuous band mounted on and running between two or

Building site circular saw bench hand-fed machine weighing less than 200 kg fitted with a single circular (other than a scoring saw) with a diameter of 350 mm or more, up to a diameter of 500 mm, which is fixed during the normal cutting operation, horizontal table, all or part of which is fixed during operation. The sawblade is horizontal non-tilting spindle, the position of which remains stationary machining. The machine may have any of the following features: the facility for the sawblade to be raised and lowered through the table machine frame below the table may be open or enclosed the saw may be fitted with an additional, manually operated travelling table (not adjacent to the sawblade). saw, portable power-driven tool designed to cut wood with a saw chain and consisting integrated compac unit of handles, power source and cutting attachment, supported with two hands. Combined high pressure flusher and suction vehicle vehicle which may work either as a high prcssure flusher or as a suction high pressure flushcr and suction vehicle.

Compaction machine machine which compacts materials, e.g. rock fills, soil or asphalt through a rolling, tamping or vibrating action of the working tool. It may self-propelled, towed, walk-behind or an attachment to a carrying machine. machines are subdivided as follows: rollers for ride-on operators: self-propelled compaction machines with one or more metallic cylindrical bodies (drums) or rubber tyres; the operator’s station is an integral part of the machine walk-behind rollers: self-propelled compaction machines with one or more metallic cylindrical bodies (drums) or rubber tyres in which the operation facilities for travelling, steering, braking and vibrating are disposed in such a way that the machines have to be operated by an attending operator or by remote control towed roller: compaction machines with one or more metallic cylindrical bodies (drums) or rubber tyres which do not possess an independent drive system and where the operator’s station is to be found a tractor unit vibratory plates and vibratory rammers: compaction machines with mainly flat base plates which are made to vibrate. They are operated by attending operator or as an attachment to a carrier machine explosion rammers: compaction machines with mainly a flat pad as the compacting tool which is made to move in a predominantly vertical direction by explosion pressure. The machine is operated by an attending operator.